P0340
Read the instructions below then start the fault diagnostic procedure.
Symptom:
P0340 |
Fault symptoms
CHECK ENGINE lamp on.Conditions
Engine running. More than 5000 engine revolutions since start. No camshaft position.Diagnostic help
The cause of the fault can be:• incorrect spark plugs
- wrong type
- fouled
- damaged
• fault in wiring harness
- break in any of the leads to control module pins 17 or 18
• severe misfiring
. Intermittent faults may occur in connection with short circuits and open circuits. Jiggle the wiring harness at several points and in several directions to locate any problems in the wiring, including intermediate connectors. Observe the multimeter, scan tool or test lamp during the check.