Control module power supply
|
|
Control module power supply
|
+30
The main relay is supplied with +30 from maxifuse 2. Control module pins 1 and 48 are powered from fuse 28.
The control module uses +30 for its memory.
|
•
|
If +30 is absent, the engine will not start and the system cannot be contacted with the diagnostic tool.
|
+15
Control module pin 60 is supplied with +15 from fuse 17. When +15 is applied to pin 60, the control module will be activated.
|
•
|
If +15 is absent, the engine will not start and the system cannot be contacted with the diagnostic tool.
|
