Engine coolant temperature sensor
| Engine coolant temperature sensor |
| 1. |
Open the cap on the expansion tank to release the pressure in the cooling system. Screw back on the cap.
|
|
| 2. |
Remove the engine cover.
|
|
| 3. |
Unplug the connector and remove the sensor
|
|
| To fit |
| 1. |
Fit the sensor and plug in the connector.
|
|
| 2. |
Fit the engine cover and top up the coolant as necessary.
|
|
Tightening torque: 13 Nm (9.5 lbf ft)
|
|||||||
Warning
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
