Diagnostics communication
| Diagnostics communication |
The Trionic control module communicates with the diagnostic tool via pin 33. The K-lead is connected to the data link connector via the MIU. TWICE and Trionic exchange immobilizer information via MIU when the ignition is turned on.
The diagnostic tool can communicate with Trionic when the ignition is on and the engine is running but also for 15 minutes after the ignition has been turned off. Of course, it will not then be possible to activate functions requiring +15 or +54 supply.
| Diagnosis |
| • |
Diagnostic communication in MIU passes an integrated relay. Normally, MIU will activate the relay so that the immobilizer code can be exchanged between TWICE and Trionic whenever necessary. When the diagnostic tool communicates with Trionic, MIU will release the relay, whereby the diagnostic tool and Trionic become connected. This means that diagnostic communication with Trionic is possible even when the power supply or ground to MIU is absent.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
