SAAB WIS ONLINE

EVAP close valve

EVAP close valve

To remove


1. Raise the car.


2. Detach the shut-off valve hose from the EVAP canister.

3. Lower the car slightly.

4. Blow clean and remove the white cap on the shut-off valve.

5. Unplug the connector and lift the valve upwards.


6. Detach the hose connection from the valve.

7. Remove the valve.


To fit



1. Connect the valve to the hose. Make sure that the opening for the cable is correctly positioned.

2. Spray with Kontakt 61 and plug in the connector.

3. Carefully insert the valve into the vent hose.

Important

Be careful with the foam rubber filter so that it is not damaged or incorrectly positioned.


4. Fit the cap.


5. Raise the car.

6. Adjust and connect the shut-off valve hose to the EVAP canister.

7. Lower the car to the floor.