SAAB WIS ONLINE

Ignition discharge module

Ignition discharge module

To remove



1. Unplug the 10-pin ignition discharge module connector.

2. Remove the 4 screws.

3. Lift up the module.


To fit



1. Apply Krytox (part no. 30 19 312) to the rubber seals and fit the ignition discharge module.

2. Fit the 4 screws.

Tightening torque 11 Nm (8.1 lbf ft)

3. Spray the 10-pin ignition discharge module connector with Kontakt 61 (part no. 30 04 520). Plug in the connector.