Intake air temperature sensor
| Intake air temperature sensor |
| 1. |
Unplug the connector to the temperature sensor on the turbo delivery pipe.
|
|
| 2. |
Remove the temperature sensor.
|
|
| To fit |
| 1. |
Fit the temperature sensor. Change the sealing washer if necessary.
|
|
| 2. |
Spray the connector with Kontakt 61, part no. 20 31 763, and plug it in.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
