P0340
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK ENGINE goes on after two driving cycles.
Camshaft Position Sensor. Malfunction.
Fault symptoms
|
•
|
CHECK ENGINE goes on after two driving cycles.
|
Conditions
The following conditions apply for this DTC:
|
•
|
Engine running and main relay voltage exceeding 11 V.
|
|
•
|
1000 combustions taken place since starting.
|
|
•
|
Ignition and injection have not been synchronized with camshaft position.
|
Diagnostic help
Fault diagnosis concerns an electrical fault in the connecting leads, fouled or defective spark plugs or in the ignition discharge module.
Functions in the diagnostic tool related to the fault:
|
•
|
Camshaft Position Synchronized, unit ON/OFF.
|
|
•
|
Combustion Detection Cyl 1+2 / Bank1, unit %
|
|
•
|
Combustion Detection Cyl 3+4 / Bank2, unit %
|
See also description of test readings,
, for more information.
