P0605
Read the instructions below then start the fault diagnostic procedure.
Symptom: Fuel shut-off.
| P0605 |
Fault symptoms
| • |
Fuel shut-off.
|
|
Conditions
The following conditions apply for this DTC:| • |
Ignition ON and incorrect programming of flash memory.
|
|
Diagnostic help
Flash memory incorrectly programmed, which means that the control module must be changed unless it can be reprogrammed.Checking the wiring
Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Observe the multimeter, diagnostic tool or test lamp during the check.This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
