SAAB WIS ONLINE

P1610

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE goes on immediately. Throttle control in limp-home mode. Fuel shut-off at engine speeds above 2200 rpm. Idling speed incorrect. Cruise control not working.

P1610


Internal Control Module. Malfunction.


Fault symptoms


CHECK ENGINE goes on immediately.

Throttle control in limp-home mode.

Fuel shut-off at engine speeds above 2200 rpm.

Idling speed incorrect.

Cruise control not working.


Conditions

The following conditions apply for this DTC:


Ignition in ON position.

Pedal position deviation between processors 592 and 339.


Diagnostic help

Fault diagnosis concerns internal control module fault.

Checking the wiring

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Observe the multimeter, diagnostic tool or test lamp during the check.