SAAB WIS ONLINE

A/C relay

A/C relay





When the A/C compressor is activated from either the ACC control module or with the A/C button on the dashboard and all other conditions have been fulfilled, DICE will send bus information "A/C ON". The value is used by Trionic T7.

The control module then calculates the impending torque requirement of the compressor based on the A/C pressure and subsequently requests a corresponding increase in the air mass/combustion. After a short delay, the control module will ground pin 4, which is connected to the A/C relay.

The control module breaks the circuit to pin 4 when the engine has not yet started.



Diagnostics


• If there is an open circuit or short circuit to ground, diagnostic trouble code P1656 will be generated.

• If there is a short circuit to B+, diagnostic trouble code P1657 will be generated.

Note

The A/C request from DICE can be read with the diagnostic tool.