Fuel pump relay
| Fuel pump relay |
The fuel pump relay is located in the relay board under the dashboard. It supplies the fuel pump and the oxygen sensor preheating.
The fuel pump relay is controlled from pin 50, which is grounded to operate the relay.
When the ignition is turned to the "ON" position, the fuel pump relay will operate for 1 second. This is to build up pressure prior to pre-injection, which is performed when the crankshaft starts to rotate.
| Diagnostics |
| • |
If there is an open circuit or short circuit to ground, diagnostic trouble code P1654 will be generated.
|
|
| • |
If there is a short circuit to B+, diagnostic trouble code P1655 will be generated.
|
|||||||
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
