No sound from one of the front loudspeakers while the others function normally.
Read the instructions below then start the fault diagnostic procedure.
Symptom: No sound from one of the loudspeakers.
| No sound from one of the front loudspeakers while the others function normally. |
Fault symptoms
No sound from one of the loudspeakers.Probable cause of fault
Break in a loudspeaker coil.Break in a loudspeaker circuit or in the connection between the main unit and the amplifier.
Diagnostic help
Loudspeaker test: 4 channels.Start the loudspeaker test by holding down the RADIO button when the main unit is switched on.
| Important | ||
|
Check the balance and fader control settings. |
||
Check wiring harness.
Jiggle the wiring harness at several points and in different directions to reveal intermittent breaks and short-circuits in the leads. Observe the multimeter, test lamp or diagnostic instrument during the test.This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
