Brake pedal switch
| Brake pedal switch |
| To remove |
| 1. |
Remove the lower section of the dashboard.
|
|
| 2. |
Unplug the brake pedal switch connector.
|
|
| 3. |
Remove the brake pedal switch, using a screwdriver.
|
|
| To fit |
| 1. |
Spray the connector with Kontakt 61 (part no. 30 04 520).
|
|
| 2. |
Carefully pull out the switch's pushrod to its stop position.
|
|
| 3. |
Depress the brake pedal and fit the switch.
|
|
| 4. |
Carefully release the pedal.
|
|
| 5. |
Plug in the connector.
|
|
| 6. |
Fit the lower section of the dashboard.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
