Instrument lighting
Read the instructions below then start the fault diagnostic procedure.
Symptom: Instrument lighting not working.
| Instrument lighting |
Fault symptoms
Instrument lighting not working.
Diagnostic help
The lighting can be activated with the diagnostic tool.Information on the instrument lighting comes from SID.
Check wiring harness.
Jiggle the wiring harness at several points and in different directions to reveal intermittent breaks and short-circuits in the leads. Observe the multimeter, test lamp or diagnostic instrument during the test.This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
