Selector lever position indicator

Read the instructions below then start the fault diagnostic procedure.

Symptom: Selector lever position indicator inoperative.

Selector lever position indicator

Fault symptoms

Selector lever position indicator inoperative.

Condition

No diagnostic trouble code in the TCM. If there is a diagnostic trouble code in the TCM, see Automatic transmission, Fault diagnosis, diagnostic trouble code.

Diagnostic help

The lamps in the indicator display can be activated with the diagnostic tool.

-	Select “Activate”

-	Select the appropriate lamp.

Readings of the main instrument unit's 4 inputs (A/B/C/PA) from the selector lever position sensor can be obtained with the diagnostic tool. For the right combinations for the different selector lever positions, see Selector lever position indicator in

Check the wiring harness

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short-circuits in the leads. Observe the multimeter, test lamp or diagnostic tool during the test.