SAAB WIS ONLINE

Checking hydraulic pressure

Checking hydraulic pressure


Important

This test must not be carried out for longer than 5 seconds! It is not recommended for turbo variants.



1. Remove the test plug from the transmission casing and connect an oil pressure gauge.

2. Chock all four wheels on the car.


3. Apply the handbrake fully.


4. Press the brake pedal down hard.


5. Start the engine and check the idling speed : 900 rpm.


Output

Idling speed

Stalling speed

C1

4.0 bar

12.0 bar

C2

0 bar

0 bar



6. Move the selector lever to position D and check the system pressure as indicated in the table.


7. Move the selector lever to position R and check the system pressure as indicated in the table.

Output

Idling speed

Stalling speed

C1

0 bar

0 bar

C2

6.7 bar

18.0 bar