SAAB WIS ONLINE

Output shaft speed sensor

Output shaft speed sensor

The output shaft speed sensor is mounted in the transmission casing. It provides the control module with information on the speed of the transmission's output shaft on pin 15. The sensor is grounded via pin 30.

The sensor is electromagnetic (inductive) and measures the output speed when it is affected by a toothed wheel (parking lock ring gear). The control module uses the frequency to calculate the output speed. The voltage of the sensor increases with the engine speed. At 30 km/h the voltage is 1.1 V AC and 110 Hz measured across both sensor pins.

The resistance across the pins is 300-600 ohms.

The control module uses the output shaft speed to control the shifting times.



Diagnostics

If the output speed is absent, diagnostic trouble code P1822 will be generated.

The TCM goes into Limp-Home mode.