SAAB WIS ONLINE

Intermediate shaft bearing

Intermediate shaft bearing

To remove



1. Remove the circlip from the drive shaft.

2. Fix the housing in a vice and tap out the shaft with a plastic mallet.

3. Remove the larger circlip securing the bearing in the bearing bracket.


4. Press the bearing out of the housing using 87 91 311 Sleeve, bearings driver shaft and 87 92 236 Support .


To fit



1. Fit the new one in the support bearing bracket. Use 83 90 122 Drift , 87 91 311 Sleeve, bearings driver shaft and 87 90 461 Sleeve, bearing race .

2. Fit the larger circlip.

3. Press the shaft into the support bearing bracket using 87 90 461 Sleeve, bearing race and 89 96 787 Kit press sleeves as support.


4. Fit the circlip.