The ABS lamp is constantly on.
Read the instructions below then
start the fault diagnostic procedure.
Symptom: The ABS lamp is constantly on.
No DTCs generated.
|
|
The ABS lamp is constantly on.
|
Fault symptoms
The ABS lamp is constantly on.
No DTCs generated.
Conditions
|
•
|
Circuit between pin 21 on the ABS control module and pin 10 on the MIU (K20) shorting to ground.
|
|
•
|
Short-circuit contact strip in connector defective.
|
Diagnostic help
The ABS warning lamp can be activated using the diagnostic tool.
