Track rod length
| Track rod length |
| 1. |
Adjust toe-in, see
.
|
|
| 2. |
Measure A. The measurement must not under any conditions exceed 52 mm (2.0 in).
|
|
| 3. |
Perform step 2 on the other side of the car.
|
|
| 4. |
Maximum allowable difference between B and C is 3 mm.
|
|
| 5. |
Adjust if necessary. After adjusting the length of the track rod, toe-in must again be checked.
|
|
| 6. |
Check the position of the steering wheel.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
