B2441, B2442, B2443, B2444
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Airbag warning lamp on.
|
|
B2441, B2442, B2443, B2444
|
B2441
Driver Belt Tensioner. Open Circuit
B2442
Driver Belt Tensioner. Short to Ground
B2443
Driver Belt Tensioner. Short to B+
B2444
Driver Belt Tensioner. Resistance too Low
Fault symptoms
Airbag warning lamp on.
Conditions
The following conditions are applicable to the respective diagnostic trouble codes:
B2441
|
•
|
The resistance measured by the control module is greater than 3.9 Ω for 10 seconds
|
|
•
|
The resistance measured by the control module is greater than 225 Ω for 160 ms
|
Diagnosis is not performed if DTC B2442 or B2443 has been generated.
B2442
|
•
|
The voltage applied to control module pin 9 is lower than 1.5 V for 1.25 seconds
|
B2443
|
•
|
The voltage applied to control module pin 8 is higher than 3.5 V for 1.25 seconds
|
B2444
|
•
|
The resistance measured by the control module is lower than 1.4 Ω for 20 seconds
|
Diagnosis is not performed if DTC B2442 or B2443 has been generated.
