Adjusting the front side window interior moulding, 3D, CV
|
Adjusting the front side window interior moulding, 3D, CV
|
1.
|
Push down the moulding to the correction position. Remove the door panel.
|
2.
|
Lower the side window.
Important
|
Protect the side window when drilling by placing a putty knife or similar tool between the interior side window moulding and the side window.
|
|
|
3.
|
Drill a 2 mm hole about 10 mm (3D) or about 55 mm (CV) from the rear of the interior window moulding.
Drill through the moulding and the metal flange.
|
4.
|
Screw on the moulding.
|