Lumbar support adjustment
| Lumbar support adjustment |
| 1. |
Remove the backrest upholstery, see .
There is no need to remove the head restraints, staples or any connectors for the backrest adjustment. |
|
| 2. |
Remove the lumbar support mechanism, 2 screws.
|
|
| 3. |
Detach the hook holding the wire on the opposite side.
Undo the clip holding the wire. |
|
| 4. |
Lift out the lumbar support mechanism.
|
|
| To fit |
Fit in reverse order.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
