SAAB WIS ONLINE

Glass hatch (sunroof hatch)

Glass hatch (sunroof hatch)

To remove



1. Open the sunroof to expose the retaining screws for the cover moulding.

2. Remove the four retaining screws from the cover moulding.

3. Close the hatch.

4. Remove the rear end of the cover by releasing the clip, one on each side, and pulling towards the centre of the car.

5. Remove the 6 retaining screws from the glass hatch.


6. Lift off the glass hatch.


To fit



1. Fit the sunroof hatch in position.

2. Insert the 6 retaining screws.

3. Adjust the fit against the roof, one side at a time:

0 to -1 mm at the front edge

0 to +1 mm at the rear edge

4. Tighten the retaining screws.

5. Open the sunroof hatch slightly so that the cover moulding can be fitted.


6. Fit the cover moulding, close the hatch and fasten its clips at the outer edge.

7. Open the hatch slightly and tighten the four retaining screws.

8. Close the hatch.

9. Check the function.