74 96 292 Thread locking adhesive
|
|
74 96 292 Thread locking adhesive
|
Loctite 270. For locking threaded articles. . 50 ml bottle.
Thread locking adhesive for bolts in flywheel and universal joint driver.
1
No restrictions apply when transporting this product.
Repeated or prolonged contact with sensitive or scratched skin may cause allergic reactions. Use Loctite dosage equipment in order to avoid skin and eye contact.
|
Material safety data sheet
|
|
1.
|
IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
Product code
|
0128270
|
Product name
|
270 Threadlock, strong
|
Manufacturer - supplier
|
Loctite Sweden AB
Box 8823
SE-402 71 Göteborg
Tel: +46 31 7505400
Fax: +46 31 7505391
Tel (emergencies): +353-1-4599301 / +353-87-2629625 / +353-1-4046444
|
|
|
2.
|
COMPOSITION/INFORMATION ON INGREDIENTS
Product type
|
Product based on polyethyleneglycol dimethacrylate. Anaerobic thread sealant.
|
Ingredient
|
CAS-no.
|
Conc.
|
R-phrases
|
Classification
|
Diethyl toluidine
|
613-48-9
|
0.50 - 0.90
|
R23/24/25, R33
|
T
|
Dimethyl toluidine
|
609-72-3
|
0.10 - 0.40
|
R23/24/25, R33, R52/53
|
T
|
Cumene hydroperoxide (80%)
|
80-15-9
|
1.00 - 3.00
|
R7, R21/22, R23, R34, R48/20/22, R51/53
|
C, O
|
Key
|
FB/FH/FM = Hazard code for fire/health/environment
T+ = Very toxic
T = Toxic
C = Corrosive
Xn = Harmful
Xi = Irritant
V = Moderately harmful
IK = Not subject to labelling
E = Explosive
O = Oxidizing
F+ = Extremely flammable
F = Highly flammable
N = Dangerous for the environment
|
|
|
3.
|
HAZARDS IDENTIFICATION
Irritation to eyes and respiratory system. Prolonged contact with skin, particularly damaged skin, may cause sensitization or dermatitis in sensitive individuals.
|
|
4.
|
FIRST AID MEASURES
Inhalation
|
Low volatility. In case of discomfort, move to fresh air.
|
Skin
|
Wash immediately with plenty of soap and water. If irritation persists, seek medical advice.
|
Eyes
|
Rinse immediately with plenty of water for at least 15 minutes. If irritation persists, seek medical attention.
|
Ingestion
|
Rinse mouth with water then give plenty of water to drink. Do not induce vomiting. Seek medical advice.
|
|
|
5.
|
FIRE-FIGHTING MEASURES
Suitable extinguishing media
|
Non-flammable product (flash point >100°C). If product is involved in fire extinguish with dry powder, foam or carbon dioxide.
|
Fire/Explosions risks
|
Trace amounts of toxic fumes may be released on incineration.
|
Protective equipment
|
Use respiratory equipment.
|
|
|
6.
|
SPILLAGE/ACCIDENTAL RELEASE MEASURES
Personal precautions
|
Clean with soap and water or detergent solution. Ventilate the area.
|
Methods for cleaning up
|
For large spills, confine and absorb with sand, earth or similar absorbent material and place in sealed container for disposal. For small spills wipe up with paper towel and place in container for disposal.
|
|
|
7.
|
HANDLING AND STORAGE
Advice for safe handling
|
No special handling requirements. Prolonged or repeated skin contact should be avoided to minimize any risk of sensitisation. Use in a well-ventilated area.
|
Storage instructions
|
Store in original containers at 8°C-21°C and do not return residual materials to containers as contamination may reduce the shelf life of the bulk product.
|
|
|
8.
|
EXPOSURE CONTROLS/PERSONAL PROTECTION
In circumstances where there is a potential for prolonged or repeated skin contact, the use of disposable gloves (polyethylene, natural rubber or equivalent ester-resistant material) is recommended. Use of Loctite applicator equipment is recommended.
|
|
9.
|
PHYSICAL AND CHEMICAL PROPERTIES
Form/state
|
Liquid
|
Odour
|
Characteristic
|
Colour
|
Green
|
pH
|
Range between 3 to 6
|
Solubility in water
|
Insoluble
|
Solubility in acetone
|
Miscible
|
Density
|
1.08 kg/m
3
|
Flash Point (PMCC)
|
>100 °C
|
Vapour pressure
|
<0.1 mm Hg @ 25°C
|
|
|
|
|
10.
|
STABILITY AND REACTIVITY
Stability
|
Stable under normal conditions.
|
Non-reactive with
|
Water or oxidizing agents except for peroxides.
|
Other information
|
Polymerisation may occur after some time in the absence of air and/or the presence of a metal.
|
|
|
11.
|
TOXICOLOGICAL INFORMATION
Inhalation
|
Irritating to respiratory system.
|
Skin
|
Acute dermal LD50 (rabbit) is estimated to be > 2000mg/kg. Although it is not a common sensitizer there may be a risk of sensitization on prolonged or repeated contact with damaged or sensitive skin.
|
Eyes
|
Irritation to eyes.
|
Ingestion
|
This product is considered to be of low toxicity. Acute oral (rat) >5000mg/kg.
|
|
|
12.
|
ECOLOGICAL INFORMATION
Storage
|
Keep away from water and drains.
|
Mobility
|
Solid material. Insoluble in water. No negative effects expected.
|
Ecotoxicity
|
Cured Loctite products are typical polymers and do not pose any immediate environmental hazards. In the cured state contribution of this product to environmental hazards is insignificant in comparison to articles in which it is used.
|
Other information
|
Biological and chemical oxygen demands (BOD and COD) of cured Loctite products are insignificant. Precautions required with respect to environmental hazards of articles in which this product is used should be considered.
|
|
|
13.
|
DISPOSAL CONSIDERATIONS
Disposal considerations
|
After use, packaging containing residual product should be disposed of as "chemically contaminated waste" in accordance with local and national regulations. Large quantities of unused products may be disposed as chemical waste after polymerizing by adding Loctite Activator 7638 or 7641. Incinerate or bury in accordance with local and national regulations. Contribution of this product to waste is very insignificant in comparison to articles in which it is used.
|
|
|
14.
|
TRANSPORT INFORMATION
UN-no.
|
None
|
Air (IATA)
|
Not applicable
|
Sea (IMO)
|
Not applicable
|
Road/Rail (ADR/RID)
|
Not applicable
|
|
|
15.
|
REGULATORY INFORMATION
Contains
|
Cumene hydroperoxide
|
Hazard class
|
Irritant
|
R-phrases
|
R36/37
|
Irritating to eyes and respiratory system.
|
S-phases
|
S25
|
Avoid contact with eyes
|
|
|
S26
|
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
|
|
|
S51
|
Use only in well-ventilated areas.
|
|
|
16.
|
OTHER INFORMATION
Supersedes material safety data sheet no: 0128270 SE dated 2000-10-11.This material safety data sheet was prepared in accordance with Commission Directive 98/98/EC adapting to technical progress for the 25th time Council Directive 67/548/EEC. Classification and labelling in accordance with KIFS 1999:3. The provisions of the Swedish National Board of Occupational Safety and Health on thermosetting plastics, AFS 1996:4, apply to this product. The information in this material safety data sheet was obtained from reputable sources and to the best of our knowledge is accurate and current at the mentioned date. Neither Loctite nor its subsidiary companies accept any liability arising out of the use of the information provided here or the use, application or processing of the product described herein. Attention of users is drawn to the possible hazards from improper use of the product.
Material safety data sheet revised
|
2001-07-25
|
For more information
|
Loctite Corporation, International Health and Regulatory Affairs, Tallaght Business Park, Whitestown, Dublin 24, Ireland.
Tel: +353-1-4046585
Fax: +353-1-4510806
|
Produced by
|
Dr Prabhu Kulkarni FICI, FIOSH, MBIRA, Senior HRA Specialist, Health and Regulatory Affairs - Europe.
|
|
