SAAB WIS ONLINE

Engine suspension front right

Engine suspension front right

To remove



1. Raise the car and remove the lower engine cover.

Lower the car to the floor.

2. Remove the air cleaner with mass air flow sensor and hoses from the turbocharger and camshaft cover.


3. Detach the fuel hoses from the bracket and dismantle the wiring harness with bracket. Bend it to one side.

4. Place a jack with a wooden block on top under the oil sump and carefully lift the engine to take the weight off the right-hand engine mounting.

5. Dismantle the right-hand engine mounting from the engine and the body.


6. Dismantle the engine mounting from the bracket.


To fit



1. Fit the engine mounting to the bracket.

Tightening torque 47 Nm +45° (35 lbf ft +45°).

2. Fit the right-hand engine mounting to the engine.

Tightening torque: 47 Nm (35 lbf ft).

Carefully lower the engine and remove the jack.

3. Make sure the engine is suspended freely and tighten the right-hand engine bracket to the body.

Tightening torque: 47 Nm (35 lbf ft).

4. Refit the wiring harness and bracket and attach the fuel hoses to the bracket.


5. Fit the air cleaner and mass air flow sensor.

6. Raise the car and refit the lower engine cover.


Lower the car to the floor.