Fuel pressure regulator (B204i/E)
|
|
Fuel pressure regulator (B204i/E)
|
Warning
|
|
Removal of the fuel pressure regulator involves partial dismantling of the car's fuel system. The following points must therefore be observed in connection with this work:
|
|
•
|
Work only in a well-ventilated area! If approved equipment for the extraction of fuel vapours is available, be sure to use it.
|
|
•
|
Wear suitable gloves! Prolonged contact with fuel can cause skin irritation or dermatitis.
|
|
•
|
Keep a class BE fire extinguisher close at hand! Beware of sparks caused by short circuits and when connecting and disconnecting leads in electrical circuits.
|
|
•
|
No smoking anywhere in the vicinity.
|
|
|
|
|
|
|
Important
|
|
To minimize any residual fuel pressure, remove the fuel pump fuse no. 32 while the engine is idling. Turn off the ignition once the engine has stopped. Refit the fuse.
|
|
|
|
1.
|
Detach the vacuum hose.
|
|
2.
|
Unscrew the bolt and open the clamp.
|
|
3.
|
Pull out the pressure regulator.
|
|
1.
|
Press on the pressure regulator.
|
|
2.
|
Fit the clamp and bolt.
|
|
Important
|
|
Grease the O-ring before fitting.
|
|
|
