SAAB WIS ONLINE

Menu "Activate"

Menu "Activate"

Note

When a system function is activated with a diagnostic instrument this means that the Motronic control module does something that is not functionally normal, whereby diagnostic trouble codes can be generate in other systems that are dependant on the Motronic system.

The injectors are activated in the following order 1-3-4-2 and the CHECK ENGINE lamp (MIL) flashes during the activating stage.


Important

The activating functions should be used with care.

Always deactivate an active function before you continue in the menus.

Always clear any generated Diagnostic Trouble Codes (DTC) in the Motronic system, and/or possibly other systems, after completed work.

At the same time as activating the components in the table, the flash codes will be displayed via the CHECK ENGINE lamp (MIL) and thereby indicating that the Motronic control module is activating the addressed commands.


Activation Flash code Description
Injector 1

22

The control module activates the valve for 30 seconds with 1 Hz

Injector 2

24

The control module activates the valve for 30 seconds with 1 Hz

Injector 3

23

The control module activates the valve for 30 seconds with 1 Hz

Injector 4

25

The control module activates the valve for 30 seconds with 1 Hz

IAC Valve

32

The control module activates the idle control valve for 30 seconds with an opening ratio of 10% - 90%

EVAP Valve

33

The control module activates the EVAP-canister purge valve relay for 30 seconds with 0.5 Hz

AC Relay

34

The Control module activates the A/C relay for 30 seconds with 0.5 Hz