Changing spark plugs
Changing spark plugs |
1. |
Unplug the 10-pin DI module connector.
|
2. |
Undo the 4 DI module bolts.
|
3. |
Remove the spark plugs.
|
4. |
Check the electrode gap on the spark plugs and adjust if necessary.
|
To fit |
1. |
Fit the spark plugs
Tightening torque: 27 Nm (20 lbf ft) |
2. |
Fit the ignition discharge module. Tighten the screws.
Tightening torque: 11 Nm (8 lbf ft) |
3. |
Plug in the ignition discharge module connector.
|