SAAB WIS ONLINE

P0335

Read the instructions below then start the fault diagnostic procedure.

Symptom: Engine will not start or misfires. Other diagnostic trouble codes (misfiring, camshaft position).

P0335


Crankshaft Position Sensor. Malfunction.


Fault symptoms

Engine will not start or misfires. Other diagnostic trouble codes (misfiring, camshaft position).

Note

Several diagnostic trouble codes are generated if the ground connection to control module pin 67 is missing.


Conditions

Vehicle speed >30 km/h. Engine speed >1500 rpm. Brakes not applied. Sensor reading incorrect number of ribs (teeth) per crankshaft revolution.

Diagnostic help

This diagnostic trouble code most often indicates an intermittent fault. If completely out of working order, the engine will not start and diagnostic trouble codes cannot be generated. The diagnostic trouble code can be generated if the slotted ring, which is mounted on the crankshaft, is damaged e.g. when working on the engine.

Checking the wiring harness. Intermittent faults may occur in connection with short circuits and open circuits. Jiggle the wiring harness at several points and in several directions to locate any problems in the wiring, including intermediate connectors. Observe the multimeter, scan tool or test lamp during the check.