SAAB WIS ONLINE

P0505, P0506, P0507

Read the instructions below then start the fault diagnostic procedure.

Symptom: Low, high or unsteady idling speed. Idling speed sensitive to changes in load.

P0505, P0506, P0507


Idle Speed Control. Malfunction.

Idle Speed Control. Idling Speed too Low.

Idle Speed Control. Idling Speed too High.


Fault symptoms

Low, high or unsteady idling speed. Idling speed sensitive to changes in load.

Conditions




Vehicle speed has exceeded 20 km/h during this driving cycle

Car stationary

Engine coolant temperature >60C (>140F)

Throttle position sensor indicating idling speed

Engine speed exceeding 1200 rpm or below 700 rpm

Normal idling speed cannot be attained


Diagnostic help

The function of the idle speed control valve can be checked with the diagnostic tool.


- Reading current degree of opening:



- Select " Data Display / Output Control (New)".



- Select " Idle Air Control Valve".



- Activating the valve:



- Select " ACTIVATE".



- Select " Idle Air Control Valve".


The valve is activated for 10 sec.

Checking the wiring harness. Intermittent faults may occur in connection with short circuits and open circuits. Jiggle the wiring harness at several points and in several directions to locate any problems in the wiring, including intermediate connectors. Observe the multimeter, scan tool or test lamp during the check.