Crankshaft position sensor
|
|
Crankshaft position sensor
|
The crankshaft position sensor is located at the flywheel end of the engine block.
|
1.
|
Remove the engine cover.
|
|
2.
|
Remove the turbo delivery pipe and plug the turbo delivery hose.
|
|
3.
|
Free the sensor cable by unplugging the connector and removing the clips/cable ties.
|
Important
|
|
Note the position of the cable.
|
|
|
|
|
5.
|
Remove the sensor heat shield.
|
|
6.
|
Unscrew the sensor retaining bolt and remove the sensor. Make a note of the position of the sealing ring.
|
|
1.
|
Clean the sensor seating and fit the sensor with the sealing ring correctly positioned.
Tightening torque retaining bolt 8 Nm (5.9 lbf ft)
|
|
2.
|
Refit the cable and secure it with clips/cable ties.
|
|
3.
|
Plug in the connector.
|
|
4.
|
Fit the turbo pressure pipe and engine cover.
|
