Engine coolant temperature sensor
|
Engine coolant temperature sensor
|
1.
|
Open the cap on the expansion tank to release the pressure in the cooling system. Screw back on the cap.
|
2.
|
Remove the engine cover.
|
3.
|
Unplug the connector and remove the sensor
|
1.
|
Fit the sensor, replace the seal and washer if necessary and plug in the connector.
|
2.
|
Fit the engine cover and top up the coolant as necessary.
|
Tightening torque: 13 Nm (9.5 lbf ft)
Warning
|
Escaping coolant under pressure can cause serious injuries!
|
|
|
|
|