EVAP canister close valve
EVAP canister close valve |
1. |
Raise the car and remove the front right wheel.
|
2. |
Remove the mudflap.
|
3. |
Remove the wheel arch liner.
|
4. |
Undo the retaining screw securing the front of the wheel arch liner to the air shield and the retaining screw securing the wing arch liner to the bumper.
|
5. |
Release the wing arch liner snap fasteners from the front wing with a screwdriver and extract the liner from the wheel housing.
|
6. |
Remove the close valve.
|
To fit |
1. |
Fit the close valve.
|
2. |
Fit the wing arch liner into the wheel housing.
|
3. |
Fit the mudflap.
|
4. |
Lower the car and fit the wheel
Tightening torque: 110 Nm (80 lbf ft) |