Oxygen sensor 1
Oxygen sensor 1 |
1. |
Remove the engine cover.
|
2. |
Detach the turbo delivery pipe.
|
3. |
Unplug the sensor cable.
|
4. |
Note the position of the cable and clips/cable ties before detaching the cable. The cables must not be twisted together.
|
5. |
Raise the car and remove the oxygen sensor.
|
To fit |
Important | ||
The oxygen sensor threads must be coated with Molycote 1000 or equivalent before fitting. |
||
1. |
Fit the oxygen sensor.
Tightening torque: 55 Nm (40 lbf ft) |
2. |
Lower the car and mount the cables (must not be twisted)
|
3. |
Connect the cable to the oxygen sensor
|
4. |
Fit the turbo delivery pipe.
|
5. |
Fit the engine cover.
|
Important | ||
It is important that the cable is located correctly to prevent it making contact with the exhaust/turbocharger. |
||