SAAB WIS ONLINE

Oxygen sensor 2

Oxygen sensor 2

To remove



1. Remove the engine cover.

2. Unplug the sensor cable.

3. Note the position of the cable and any cable ties before detaching the cable. The cables must not be twisted together.

4. Raise the car and remove the oxygen sensor.


To fit

Important

The oxygen sensor threads must be coated with Molycote 1000 or equivalent before fitting.




1. Fit the oxygen sensor.

Tightening torque: 55 Nm (40 lbf ft)

2. Lower the car and mount the cables (must not be twisted).

Important

Chemicals such as contact spray and grease must not come into contact with the oxygen sensor connectors.


3. Plug in the connector

4. Fit the engine cover.