Charge air absolute pressure sensor
|
Charge air absolute pressure sensor
|
1.
|
Unplug the ignition discharge module 10-pin connector and bend it to one side.
|
2.
|
Unplug the sensor connector.
|
1.
|
Check the sealing washer and fit a new one if necessary.
Apply vaseline (part no. 30 04 520) or equivalent to the sensor threads. Fit the sensor.
Tightening torque 17 Nm (12 lbf ft)
|
2.
|
Spray the connector with Kontakt 61 (part no. 30 04 520). Plug in the connector.
|
3.
|
Plug in the ignition discharge module 10-pin connector.
|