Charge air control valve
Charge air control valve |
To remove |
1. |
Unplug the connector.
|
2. |
Mark the hoses to the control valve and detach them.
|
3. |
Detach the valve from the expanding pin and metal bracket.
|
To fit |
1. |
Attach the valve to the metal bracket and then to the expanding pin.
|
2. |
Connect the hoses to the control valve. Make sure the markings on the hoses correspond with the markings on the control valve.
|
3. |
Spray the connector with Kontakt 61 (part no. 30 04 520) and plug it in.
|