Relay, limp-home solenoid
| Relay, limp-home solenoid |
| To remove |
| 1. |
Remove the cover on the knee protection.
|
|
| 2. |
Undo the screw securing the relay holder.
|
|
| 3. |
Tilt down the relay holder.
|
|
| 4. |
Remove the relay for the limp-home solenoid.
|
|
| To fit |
| 1. |
Spray the connectors in the relay holder with Kontakt 61 (part no. 30 04 520) and fit the relay.
|
|
| 2. |
Tilt up the relay holder and fit the screw.
|
|
| 3. |
Fit the cover on the knee protection.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
