Antenna, fixed (Viggen 3D/5D)
|
Antenna, fixed (Viggen 3D/5D)
|
1.
|
Fold down the rear seat backrest.
|
2.
|
Remove the loudspeaker grilles from the left and right-hand sides of the parcel shelf.
|
3.
|
Remove the C pillar trim on left and right-hand sides.
|
4.
|
Remove the rear left and right-hand courtesy handles.
|
5.
|
Remove the two plastic clips and lower the headlining. Exercise care when handling the headlining as it can easily break.
|
6.
|
Unplug the cables that are connected to the antenna.
|
7.
|
Undo the nut by the antenna base and lift out the antenna from the inside.
|
1.
|
Fit the antenna from inside and secure with the nut.
|
2.
|
Connect the cables to the antenna.
|
3.
|
Lift up the headlining and fasten with the plastic clips.
|
4.
|
Fit the rear left and right-hand courtesy handles.
|
5.
|
Fit the trim to the left and right-hand C pillars.
|
6.
|
Fit the left and right-hand loudspeaker grilles to the parcel shelf.
|
7.
|
Raise the rear seat backrest.
|