LED (Light Emitting Diode)
|
|
LED (Light Emitting Diode)
|
|
1.
|
Remove the trim from the A-pillar by loosening the rubber strip and pulling off the trim (attached with clips).
|
|
2.
|
Remove the right-hand loudspeaker grille.
|
|
3.
|
Loosen the plate on which the LED is mounted by pushing it backwards and lifting it slightly.
|
|
4.
|
Remove the defroster cover by loosening the nut and lifting the cover straight upwards at the rear edge (attached by clips).
|
|
5.
|
Disconnect the electrical connector and remove the plate on which the LED is mounted. Remove the LED from the plate.
|
|
1.
|
Fit the LED on the plate and attach the connector to the LED. Ensure that the connector is correctly positioned underneath the defroster cover.
|
|
2.
|
Fit the defroster cover at the front edge first and then with the clips at the rear edge.
|
|
4.
|
Push the plate with the LED into position.
|
|
5.
|
Fit the loudspeaker grille.
|
|
6.
|
Fit the trim on the A-pillar.
|
