Automatic Climate Control ACC
| Automatic Climate Control ACC |
| List of components |
| No. | Name Location | Illustration |
|
Components |
||
|
22a
|
Main fuse box, dashboard
on end of dashboard by driver's door |
|
|
36
|
Motor, ventilation fan
in middle between bulkhead partition and partition wall |
|
|
38
|
Motor, air recirculation flap
on end of heater housing behind glove box |
|
|
216
|
ACC control module
under radio |
|
|
217
|
Temperature sensor, mixed air
on heater housing's front floor outlet duct to driver's side |
|
|
218
|
Temperature sensor, cabin air
in centre console switch cavity |
|
|
219
|
Suction fan, cabin air
integrated in cabin temperature sensor |
|
|
220
|
Control device, ventilation fan
in cabin on end of evaporator to passenger side |
|
|
221
|
Motor, air distribution damper
on heating and ventilation unit behind centre console |
|
|
222
|
Motor, mixed-air damper
on end of heating and ventilation unit to passenger side behind centre console side panel |
|
|
223
|
Solar sensor
centred above dashboard |
LINK3)
|
|
581
|
Solenoid valve, heat exchanger
on front edge of heater housing |
|
|
8-pin connector |
||
|
H8-1
|
By ventilation fan control
|
|
|
10-pin connector |
||
|
H10-5
|
On heater unit behind ACC panel
|
|
|
Crimped connections |
||
|
J50
|
LHD:
Approx. 250 mm from branching point SID towards grounding point G34
RHD: -- |
|
|
J59
|
LHD:
Approx. 40 mm from branching grounding point G33 towards main fuse box
RHD: Approx. 130 mm from branching main fuse box towards main fuse box |
|
|
J94
|
LHD:
--
RHD: Approx. 220 mm from branching radio connectors towards connector bracket below left A-pillar |
|
|
Grounding points |
||
|
G33P
|
Grounding point, connector bracket (power)
below left-hand A-pillar |
|
|
G34P
|
Grounding point, control module bracket (power)
below right-hand A-pillar |
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
