P0726, P0727
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK GEARBOX warning lamp on.
Engine RPM. Signal Faulty
Engine RPM. No Signal
Fault symptoms
CHECK GEARBOX warning lamp on.
Conditions
P0726:
Engine speed above 7200 rpm for at least 10 seconds.
P0727:
Gearbox input speed above 2000 rpm for more than 5 seconds and no engine speed signal.
Diagnostic help
The engine speed can be read from the engine management system using the diagnostic tool. Select "
Data Display / Output Control (New)" and "
Engine Speed (Bus from Trionic)"
Check the wiring
Jiggle the wiring harness at several points and in different directions to reveal intermittent breaks and short circuits in the various leads. Observe the multimeter, test lamp or diagnostic instrument while carrying out this check.