Checking hydraulic pressure
| Checking hydraulic pressure |
| Important | ||
|
This test must not be carried out for longer than 5 seconds! It is not recommended for turbo variants. |
||
| 1. |
Remove the test plug from the transmission casing and connect an oil pressure gauge.
|
|
| 2. |
Chock all four wheels on the car.
|
|
| 3. |
Apply the handbrake fully.
|
|
| 4. |
Press the brake pedal down hard.
|
|
| 5. |
Start the engine and check the idling speed
:
900 rpm.
|
||||||||||
| 6. |
Move the selector lever to position D and check the system pressure as indicated in the table.
|
|
| 7. |
Move the selector lever to position R and check the system pressure as indicated in the table.
|
||||||||||
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
