SAAB WIS ONLINE

Ignition switch

Ignition switch

To remove



1. Remove the selector lever housing, see .

Remove the ignition switch lock cylinder, see .

Important

When working on a dismantled selector lever housing, the selector lever should be protected with foam rubber or the like.


2. Dismantle the selector lever casing, see .

3. Cut the cable tie holding the lead for the lighting button in place.

4. Cut the cable tie securing the lead to the electromagnet (cars with ignition lock).

5. Remove pins 5 and 6 to the electromagnet lead from the connector (cars with ignition lock).

6. Remove the shift indicator display. Remove the screws securing the ignition switch.


7. Drill out the rivets.

8. Dismantle the selector lever housing.

9. Remove the selector lever retaining bolt.

10. Remove the selector lever with holder from the base plate.

11. Tap out the spacer sleeve.

12. Detach the selector lever from the holder.

13. Remove the expanding pin securing the cable ferrule.


14. Remove the clip from the locking pin.

15. Withdraw the cable from the holder.


To fit



1. Connect the cable to the holder and locking pin.

2. Fit the expanding pin securing the cable ferrule.

3. Fit the clip in the locking pin.

4. Fit the selector lever in the holder.


5. Fit the spacer sleeve through the selector lever, ignition switch lock catch, shift-lock catch and the holder.

6. Fit the selector lever with holder into the groove at the front of the base plate.

7. Fit the bolt and tighten it.

8. Fit the selector lever and ignition switch in the selector lever housing. Place the sport button's lead in the clip.

9. Rivet the parts of the selector lever housing together.


10. Screw the ignition switch in place. Fit the shift indicator display.

11. Fit a cable tie to hold the lead for the lighting in place.

12. Connect the wires to the electromagnet (cars with ignition lock).

13. Fit a cable tie through the hole in the selector lever and around the electromagnet cables.

14. Fit the ignition switch lock cylinder, see .

15. Assemble the selector lever casing, see .

16. Fit the selector lever housing, see .