Gear lever joint bushes
| Gear lever joint bushes |
Change bushes when there is play in the joint.
| 1. |
Remove the selector rod as described in
.
|
|
| 2. |
Tap out the spacer sleeve using a drift.
|
|
| 3. |
Remove and change bushes.
|
|
| 4. |
Fit the spacer sleeve.
|
|
| 5. |
Fit the selector rod as described in
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
