Bearing race - output shaft in gearcase

/ 9-3 (9400) / 2000 / 4. Transmission / Manual gearbox / Adjustment/replacement / Bearing race - output shaft in gearcase

Bearing race - output shaft in gearcase

To remove

1.

Mount the gearcase in a press.

2.

Press out the bearing race with 87 91 311 Sleeve, bearings driver shaft .

To fit

1.

Turn the housing and align the bearing race with a plastic hammer. Press in the new bearing race to the stop using 83 90 312 Drift, bearing race, input shaft . Use 87 91 188 Support, removing pinion shaft as support.