Front brake caliper
| Front brake caliper |
| 1. |
Raise the car and remove the wheel.
|
|
| 2. |
Press the brake piston back, using a pair of slip-joint pliers.
|
|
| 3. |
Depress the brake pedal by means of a brake pedal clamp.
|
|
| 4. |
Undo the brake hose from the brake caliper. Plug the brake hose and the caliper.
|
|
| 5. |
Undo the two brake caliper retaining bolts and remove the brake caliper.
|
|
| To fit |
| 1. |
Fit the brake caliper, secure the bolts with Loctite 242 no. 74 96 268 and tighten the two retaining bolts with a torque wrench.
Tightening torque 110 Nm (81 lbf ft) |
|
| 2. |
Fit the brake hose to the brake caliper.
Tightening torque 40 Nm (29 lbf ft)
|
||||||||||
| 3. |
Remove the brake pedal clamp and bleed the brake system, see
Bleeding the brake system
.
|
|
| 4. |
Fit the wheel, see
Wheels.
,
Tightening torque 110 Nm (81 lbf ft) |
|
| 5. |
Lower the car and depress the brake pedal to press out the brake pistons. Adjust the brake fluid level.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
