Track-rod ends
| Track-rod ends |
| 1. |
Track rod with inner rubber bush
|
|
| 2. |
Lock bolt
|
|
| 3. |
Adjusting screw
|
|
| 4. |
Track rod end
|
|
| 5. |
Locknut
|
|
The track rods are bolted to the middle of the steering gear through rubber bushings.
The track-rod ends are fastened to the track rods on each side with a left/right-hand threaded screw for adjusting the toe-in.
Each track-rod end is secured to the steering arm of the steering swivel member with a self-locking nut.
The track-rod ends cannot be dismantled but are self-adjusting to compensate for moderate wear.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
